Finding the exact wattage of your appliances is essential for accurate Dimensionamiento del generador — and there are four reliable methods, ranked from most to least accurate.
Método 1: Read the Nameplate (Most Accurate)
Every electrical appliance sold in the U.S. is required by law to have a nameplate or label showing its electrical ratings. Buscar:
- UL label or manufacturer data plate — usually on the back or bottom of the appliance
- vatios (W.) — if listed directly, this is the running wattage
- amperios (A) and Volts (V) — multiply them: Watts = Amps × Volts
- VA (volt-amperes) — for devices with motors or power supplies, VA × factor de potencia = Watts. Usar 0.8 Factor de potencia if the device has a motor, 1.0 for resistive loads
Example Calculations from Nameplate Data
| Aparato | Nameplate Says | Cálculo | Vatios corrientes |
|---|---|---|---|
| Refrigerador | 6.5A @ 115V | 6.5 × 115 × 0.8 FP | 598W. |
| Microonda | 1,200W input | Direct reading | 1,200W. |
| Space heater | 12.5A @ 120V | 12.5 × 120 × 1.0 FP | 1,500W. |
| Aire acondicionado de ventana | 8.5A @ 115V | 8.5 × 115 × 0.8 FP | 782W. |
| Ceiling fan | 0.75A @ 120V | 0.75 × 120 × 0.8 FP | 72W. |
Método 2: Use a Kill-A-Watt Meter ($25-40)
Plug the meter into the wall, then plug the appliance into the meter. It displays real-time watts, voltios, amps, and cumulative kWh. This is the only way to measure actual starting surge — watch the display for the 1-3 second spike when a motor starts.
What You’ll discover with a watt meter
- Actual running watts are often 30-60% lower than nameplate ratings (safety margins)
- Starting surge on compressors is 3-6× running watts for 1-3 artículos de segunda clase
- Some devices draw power even when “off” (phantom loads: 3-15W each)
Método 3: Check the Owner’s Manual or Manufacturer Website
Buscar “[marca] [modelo] wattage specifications” or check the manual’s specifications page. Manufacturers often list both running and starting watts, which saves you from estimating surge factors.
Método 4: Use Reference Tables (Least Accurate)
When you can’t access the appliance (p.ej., sizing before purchase), use reference tables. These give typical ranges — always use the high end of the range for generator sizing.
| Categoría | Rango típico | Surge Factor | Consejo de tallas |
|---|---|---|---|
| Iluminación (CONDUJO) | 5-15W per bulb | 1× | Simply count bulbs × 10W |
| Electrónica (TELEVISOR, laptop, router) | 50-300W each | 1× | Add 200W total for entertainment |
| Motor-driven (refrigerador, bomba, fan) | 200-1,500W. | 3-6× | Surge is the critical number |
| Heating (space heater, calentador de agua) | 1,000-4,500W. | 1× | Resistive — no surge |
| Cooking (microonda, range) | 1,000-5,000W. | 1-1.2× | Microwave input > cooking power |
Don’t Forget These Often-Missed Loads
- Sump pump — critical in flood-prone areas; 800corriendo / 2,000W comenzando
- Garage door opener — 600W running / 1,800W comenzando (½ HP motor)
- Well pump — often the single largest surge load in a Hogar
- Sump pump — may run continuously during storms when you need your generator most
- EV charger — Level 2 draws 7,200W; most Generadores cannot support this
Punta Huaquan: The most accurate generator sizing starts with a Kill-A-Watt meter and 15 minutes of measurements. For large installations, Poder Huaquan provides free professional load surveys.
