HUAQUAN Packaging & Shipping

1. Length≥1m；
2. Package by stretch film；

1. Fixed and sealed air inlet and outlet, with complete protection;
2. Complete with serial number;
3. Spray black high-temperature-resistant paint;

1. The air inlet and outlet are properly sealed, with complete protection measures;
2. Complete with serial number;
3. Spray black high-temperature-resistant paint;
4. Package with stretch film;

1. No deformation;
2. Complete with serial number;
3. Spray black high-temperature-resistant paint;

1. All fasteners are complete;
2. All gaskets are complete;
3. All bellows are complete;
4. All insulation cotton is complete;
5. Carton packaging;

1. Electrical cabinet schematic: Schematic diagram of auxiliarypower box, schematic diagram of fuel tank control box (if any);
2. Fire protection system: Schematic diagram of fire protection system, manual for automatic fire extinguishing system (if any), manual for smoke and temperature sensors;
3. Fuel system: Manual for electric valves (if any), manual for magnetic flap level indicator, schematic diagram of fuel system;
4. All documents should be packaged in waterproof bags and placed together with the documents of the equipment.

1. The holes on the top of the box are covered with steel plates and fastened with bolts, and waterproof tape is wound around them;
2. The flanges and inlet/outlet holes reserved on the side are sealed with blind plates and bolts, and waterproof tape is wound around them.
3. All the doors are securely locked (with stainless steel padlocks). Except for the control panel door, the door lock keys for the rest are kept by the transportation personnel, and all the keys are placed in the documents bag.

At the four corners of the equipment’s top, install detachable transportation fixing screws. Connect the equipment rigidly to the bottom plate of the container to prevent any displacement of the equipment during transportation. The screws should be no smaller than M16, and the threads must be tightened in accordance with the specified requirements.

Each individual package must be accompanied by a shipping list. For a wooden box or paper box, two packing lists are required, and they should be pasted on both the inside and outside of the box respectively;

1. The shippinglist includes the complete container assembly and the internal components;
2. A shipping list should be pasted on both the exterior of the box and the control panel；